EB 61X0
Rugged FlexRay, CAN and LIN bus interface hardware
Our multi-purpose bus interface hardware EB 61×0 is compact, powerful and comes in a rugged housing. It features FlexRay, CAN and LIN support as well as analog and digital inputs/outputs. Our EB 61×0 is well suited for use both in the office as well as in the automobile during test drives.
Technical data
- 2 × 10 Mbit/s FlexRay (TJA1080 or RS485)
- 2 × high-speed CAN (ISO/IS 11898-2)
- 4 × analog input channels: scanning frequency 10 kHz, 12-bit resolution, 0 to 20 V
- 4 × digital input channels (10 kHz scanning frequency)
- PC connection via Ethernet, USB 2.0 or RS232
- 4 digital trigger outputs
- high-performance 400 MHz Freescale microcontroller MPC5200B
- Altera FPGA Cyclone EP2C70 with 256 KB SRAM
- supply voltage: 6.5 to 30 V
- rugged automotive grade housing (150 × 100 × 25 mm), IP65
- environmental temperature range: –30 to +70 °C
- high-quality ODU connector
- low power consumption (~5 W)
- embedded logging variants with 4 GB Flash memory available (EB 6110)
Supported applications
- measurement and analysis with EB tresos Inspector
- cluster emulation with EB tresos Busmirror
- FlexRay-FlexRay-Gateway with EB tresos Busmirror
Reference projects
- FlexRay hardware interface for hardware in the loop (HIL) simulators
- Ethernet-FlexRay-Gateway for ECU-flash programming and diagnosis
